Sreath SDA alùmanum alloy ag obair seòrsa tana siolandair èadhair teann àbhaisteach
Tuairisgeul toraidh
Tha an siolandair de dhealbhadh tana agus meudan beaga iomlan, a tha freagarrach airson amannan le àite cuibhrichte. Tha an cuideam obrach aige mar as trice eadar 0.1 ~ 0.9mpa, aig a bheil èifeachdas obrach àrd.
Tha coileanadh seulachaidh earbsach agus feartan gluasad rèidh aig siolandairean sreath SDA. Bidh e a’ gabhail ri teicneòlas saothrachaidh àrd-chruinneas gus dèanamh cinnteach à teann agus mionaideachd an t-siolandair. Aig an aon àm, tha an siolandair air a uidheamachadh le inneal bufair, a dh'fhaodas buaidh agus fuaim a lùghdachadh rè gluasad.
Sònrachadh Teicnigeach
| Meud toll (mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
| Modh Cleasachd | Cleasachd dùbailte | |||||||||
| Meadhanan Obrach | Adhar Glan | |||||||||
| Brùthadh obrach | 0.1 ~ 0.9Mpa (kg / cm) | |||||||||
| Brùthadh dearbhaidh | 1.35Mpa (13.5kgf/cm) | |||||||||
| Teòthachd Obrach | -5 ~ 70 ℃ | |||||||||
| Modh Buffering | Le | |||||||||
| Meud Port | M5 | 1/8 | 1/4 | 3/8 | ||||||
| Stuth Corporra | Alloy Alùmanum | |||||||||
| Switch sensor | AC1-J | CS1-G CS1-J | ||||||||
Tuairisgeul;SDA100 fiaclan no 25 anns an t-slat piston siolandair, agus na fiaclan airson slat piston Ф 32
100≤ST <150, agus gun magnetach, fad siolandair 10.
ST≥150, ge bith le no às aonais magnetach, fad siolandair 10.
| Meud toll (mm) | Seòrsa Coitcheann | Seòrsa Magnet | D | B1 | E | F | G | K1 | L | N1 | N2 | O | ||
| A | C | A | C | |||||||||||
| 12 | 22 | 17 | 32 | 27 | / | 5 | 6 | 4 | / | M3X0.5 | / | 7.5 | 5 | M5X0.8 |
| 16 | 24 | 18.5 | 34 | 28.5 | / | 5.5 | 6 | 4 | 1.5 | M3X0.5 | 11 | 8 | 5.5 | M5X0.8 |
| 20 | 25 | 19.5 | 35 | 29.5 | 36 | 5.5 | 8 | 4 | 1.5 | M4X0.7 | 14 | 9 | 5.5 | M5X0.8 |
| 25 | 27 | 21 | 37 | 31 | 42 | 6 | 10 | 4 | 2 | M5X0.8 | 17 | 9 | 5.5 | M5X0.8 |
| 32 | 31.5 | 24.5 | 41.5 | 34.5 | 50 | 7 | 12 | 4 | 3 | M6X1 | 22 | 9 | 9 | G1/8 |
| 40 | 33 | 26 | 43 | 36 | 58.5 | 7 | 12 | 4 | 3 | M8X1.25 | 28 | 9.5 | 7.5 | G1/8 |
| 50 | 37 | 28 | 47 | 38 | 71.5 | 9 | 15 | 5 | 4 | M10X1.5 | 38 | 10.5 | 10.5 | G1/4 |
| 63 | 41 | 32 | 51 | 42 | 84.5 | 9 | 15 | 5 | 4 | M10X1.5 | 40 | 12 | 11 | G1/4 |
| 80 | 52 | 41 | 62 | 51 | 104 | 11 | 20 | 6 | 5 | M14X1.5 | 45 | 14.5 | 14.5 | G3/8 |
| 100 | 63 | 51 | 73 | 61 | 124 | 12 | 20 | 7 | 5 | M18X1.5 | 55 | 17 | 17 | G3/8 |
| Meud toll (mm) | P1 |
| 12 | Taobh dùbailte: Ф6.5 ThreadM5*0.8 Tro tholl Ф4.2 |
| 16 | Taobh dùbailte: Ф6.5 ThreadM5*0.8 Tro tholl Ф4.2 |
| 20 | Taobh dùbailte: Ф 6.5 ThreadM5*0.8 Tro tholl Ф4.2 |
| 25 | Taobh dùbailte: Ф 8.2 ThreadM6*1.0 Tro tholl Ф4.6 |
| 32 | Taobh dùbailte: Ф 8.2 ThreadM6*1.0 Tro tholl Ф4.6 |
| 40 | Taobh dùbailte: Ф10 ThreadM6*1.25 Tro tholl Ф6.5 |
| 50 | Taobh dùbailte: Ф11 ThreadM6*1.25 Tro tholl Ф6.5 |
| 63 | Taobh dùbailte: Ф11 ThreadM8*1.25 Tro tholl Ф6.5 |
| 80 | Taobh dùbailte: Ф14 ThreadM12*1.75 Tro tholl e:Ф9.2 |
| 100 | Taobh dùbailte: Ф17.5 ThreadM14*12 Tro tholl Ф11.3 |
| Meud toll (mm) | P3 | P4 | R | S | T1 | V | W | X | Y |
| 12 | 12 | 4.5 | / | 25 | 16.2 | 6 | 5 | / | / |
| 16 | 12 | 4.5 | / | 29 | 19.8 | 6 | 5 | / | / |
| 20 | 14 | 4.5 | 2 | 34 | 24 | 8 | 6 | 11.3 | 10 |
| 25 | 15 | 5.5 | 2 | 40 | 28 | 10 | 8 | 12 | 10 |
| 32 | 16 | 5.5 | 6 | 44 | 34 | 12 | 10 | 18.3 | 15 |
| 40 | 20 | 7.5 | 6.5 | 52 | 40 | 16 | 15 | 21.3 | 16 |
| 50 | 25 | 8.5 | 9.5 | 62 | 48 | 20 | 17 | 30 | 20 |
| 63 | 25 | 8.5 | 9.5 | 75 | 60 | 20 | 17 | 28.7 | 20 |
| 80 | 25 | 10.5 | 10 | 94 | 74 | 25 | 22 | 36 | 26 |
| 100 | 30 | 13 | 10 | 114 | 90 | 25 | 22 | 35 | 26 |
